The drive doesn’t seem to turn on at all. To put it simply: If you’re hearing any sort of unusual sounds from a dropped external hard drive, turn it off immediately. It could mean that the read/write heads are in direct contact with the platters, which is obviously bad news. The drive “whirrs.” A whirring sound can also indicate a spindle or head failure. Unplug the drive immediately and contact a data recovery professional. It’s possible that the read/write heads are in contact with the platters, and they could remove the magnetic material that stores your data. If you’re hearing a persistent clicking sound, the drive’s heads are having trouble finding your data.Īgain, this is a serious sign of a physical hard drive failure. The drive “clicks.” This can occur when the hard drive’s actuator arm hits a limiter, which prevents them from going too far in one direction. An engineer will need to repair or replace the spindle in order to copy the data off of the drive. If you hear a beep, we strongly recommend turning the drive off.
That’s a problem, since hard drives need to maintain a certain amount of speed in order to keep their read/write heads from coming into contact with their platters (the part of the drive that stores your data). Essentially, the spindle is “locked up,” so it’s not able to run at its normal speed.
This can occur due to electronic issues, but it’s more commonly associated with a spindle failure. The hard drive’s electronics aren’t able to provide enough power to the spindle to spin the platters. The drive “beeps.” A beeping sound usually comes from the spindle motor hub. In that case, you probably encountered one of the following scenarios: With that said, if you’re reading this article, you probably didn’t do that - you tried to start the drive, at which point you realized that your data was inaccessible.
#Repairing lacie external hard drive full#
Get it to a data recovery company and explain the situation they’ll be able to evaluate the drive without risking platter damage, ensuring that you’ll be able to get a full recovery of the contents. If the drive contains absolutely essential data, the best practice is to leave it powered off. This is the best solution for data recovery on beeping Lacie external hard drive and is the option we preform in this case.You’ve dropped your external hard drive, and you’re worried that it might not work anymore. Running through PC-3000 to check the Lacie drive is running correctly is a must, just like in option 1. Use a head comb to gently lift the heads back to the parked the position just like number 2 and straight away replace the heads from a donor drive.Once again, Platter damage can yield no recovery so we always go for option 3. Running the drive in this state could do damaged to the platters creating bad sectors in the process. It’s important to note that the heads still may be damaged after being stuck down on the platters. This will not scrape the heads along the platters and does not create bad sectors in the process. Use a head comb to gently lift and and move the stuck heads back to the parked position.Platter damage can yield no recovery so we do not preform this type of data recovery. The heads may even be damaged due them getting stuck on the platters and may end up needing a replacement anyway. This is not recommended as the process of moving the heads across the platters can damage the heads. Then running PC-3000 express to check the drive is functioning properly. Move the heads carefully off the platters over to the parked position.There are three possible solutions for stuck heads data recovery but has you read through them, we are sure you will agree the last option is the best solution for your Hard drive Data Recovery: Hard Drive Data Recovery Solutions: The goal is to repair the external hard drive just enough to preform the data recovery. Or when the drive is actively reading the drive thus moving the heads across the platter resulting in stuck heads. Ether causing the heads to move onto the platters from the parked position. This happens when the drive had power going through it when the drop/bump occurred. The beeping comes from the motor that is not able to turn. And yes, its a big problem for Lacie external hard drive data recovery. It’s most common in Lacie external hard drives. Not a lot of people are aware but inside a Lacie External Hard Drive is a Seagate Drive.Ī 2.5″ Lacie external hard drive beeps (usually after a drop) because the heads are stuck on the platters.
0 kommentar(er)
